Sealux Reg Profiles 15, 20 & 25
Available in three widths (15, 20 & 25mm) 19/32, 25/32 & 63/64 inches
Sealux Regular Profiles are Hi-Performance Shower Tray and Bath Seals. They are available in 3 different width profiles, allowing you to choose which width best suits your needs. Sealux Regular profiles are secured to the wall with Sealux-N silicone (or a high grab polymer adhesive). The Sealux Seal is is also adhered to the ledge of the tray /bath with Sealux-N ensuring a watertight seal. As part of the patented design is the incorporation of an applied silicone sealant bond breaker tape that permits for joint movement between walls and the floor i.e. shower pan or bath. They are our best selling seal where a gap between wall and bath/shower tray has to be spanned, joint movement is common and a watertight seal is crucial.
- Use With Tiles YES
- Fitted Behind Tile YES
- In Front of Tile, i.e. Repair a leaking shower tray/bath YES
- Allows Joint Movement ? Yes, by means of Patented Bond Breaker YES
- Use With Wall Panels, – Use Sealux 15 for 5/6mm wide panels, use Cladseal for wider PVC panels
- Behind Shower Wall Panels: NO (Use Cladseal or Panseal for Shower Wall Panels)
- In Front of Wall Panels YES
- Suitable with TankingYES
- Install Before Fixing Bath/Shower Tray NO
- Install After Fixing Bath/Shower Tray YES
- Commence Tiling Before Installation. YES
- Commence Tiling After Installation. YES
Choose from the range of Sealux Profiles
A Sealux Seal is a rigid PVC strip that includes Sealux-N Silicone. The Sealux Seal works with Sealux-N Silicone to create a watertight seal between the ledge of the shower tray / bath and the wall/tiles. The Sealux Seal has a patented bond breaker tape applied to the inside face, this allows the Sealux-N Silicone to only adhere to a specified surface of the seal, because of this feature the Sealux-N Silicone is capable of stretching which is needed when there is joint movement.
Our Sealux Seals are available in three different widths: 15mm, 20mm and 25mm
Hence we offer Sealux REG 15, Sealux REG 20 and Sealux REG 25
The ‘REG’ range can be installed either behind tiles (bonded to wall with Sealux-N Silicone) or it can be installed over tile (bonded to tiles with Sealux-N Silicone) Both methods are equally effective in sealing the bath or shower tray.
Sealux REG15 profiles are suitable to seal the joint where the measurement of the gap between the wall and the shower tray (or bath ) is not greater than 4mm and the thickness of the tile is not greater than 7mm
Please visit Sealux Reg 15
Sealux REG20 profiles are suitable to seal the joint where the measurement of the gap between the wall and the shower tray (or bath ) is not greater than 8mm and the thickness of the tile is not greater than 12mm
Please visit Sealux 20
Sealux 25 profiles are most suitable to seal the joint where the measurement of the gap between the wall and the shower tray (or bath ) is not greater than 12mm and the thickness of the tile is not greater than 12mm
Please visit Sealux 25
All our kits ship with comprehensive instructions, installation videos are available on our YouTube channel where you will find separate videos for each of the Sealux Seals, namely, Sealux 15, Sealux 20 and Sealux 25.
As our kits are shipped from Dublin, we take great care to ensure they arrive to you in perfect condition, our kits are also insured by our couriers partners.
We very much welcome any question you may have, please email us via the contact page as this will ensure the quickest reply, Thank you.